FAQ
What is the maximum time between application and launching the boat?
For SEAJET 031, 036, 041, the maximum time is 6 months. For SEAJET 038 and SEAJET BIOCLEAN RX / RX PRO, the maximum time is 3 months.
Can I apply Seajet antifouling over my existing antifouling?
Please check the compatibility chart for details: Compatibility Chart.
Where can I buy Seajet products?
You can find the store location here: Store Locator.
How many coats of primer do I need for osmosis protection?
2 coats of SEAJET 117 are recommended, with a total dry film thickness of 5 mils (225 micrometers).
Which product do I need to use for my propeller?
In the USA, we recommend SEAJET PELLERCLEAN. Learn more here: PELLERCLEAN Product Page.
Which antifouling can I use on my GRP hull?
You can use any bottom paint with primer for GRP hulls.
Which antifouling is safe to use on my aluminium hull?
SEAJET 038 or SEAJET BIOCLEAN RX / RX PRO are safe. Primer SEAJET 117 is necessary for the first coat on aluminium hulls.
What should I do when the maximum immersion time has exceeded?
If the maximum immersion time has been exceeded, apply another coat of antifouling paint.
How to apply antifoul/primer?
Detailed instructions are available here: Application Guide.
How to apply PellerClean?
You can see how to apply PELLERCLEAN here: PELLERCLEAN Application Guide.
Where can I find the technical datasheets?
You can find technical datasheets here: Technical Datasheets.
Seajet compatibility?
Check compatibility here: Compatibility Guide.
Which product is the best to use?
It depends on your needs. If you are keeping the boat out of water for a certain period, SEAJET 031 is suitable. For high antifouling performance, SEAJET 038 or 041 is recommended. If you want a slick surface with a silicone foul release system, SEAJET BIOCLEAN RX system is the best choice.
What is the best time to paint my boat?
A sunny day with light or no wind, humidity below 85%, and temperature above 41°F (5°C) is ideal for painting your boat.
What are the drying times and overcoating times between primer and antifouling?
Drying and overcoating times depend on the product. Please refer to the TDS for details: Technical Datasheets.
Can I thin my antifoul?
Antifoul is ready to use. In hot climates, thinning may help, but it might not be approved by local regulations. Please consult Seajet for guidance.
I need a price quotation.
Please contact our distributor. Find the store location here: Store Locator.
What can I use for rudders, stern gear, and trim tabs?
In the USA, SEAJET PELLERCLEAN is recommended. Learn more here: PELLERCLEAN Product Page.
How to mix two-component products?
Stir the base and hardener well using a power tool, shaker, or stirring stick. Ensure they are mixed until the paint becomes homogeneous before application.
Do I need a barrier coat?
Whether a barrier coat is needed depends on your current bottom paint. Consult the compatibility chart for guidance: Compatibility Guide.